Kunena Site Syndication http://www.lapooh.com/ Sun, 20 May 2012 08:44:22 +0000 Kunena 1.6 http://www.lapooh.com/components/com_kunena/template/default/images/icons/rss.png http://www.lapooh.com/ en-gb http://www.lapooh.com/index.php/forum/7-hacks-and-enhancements/680-external-antenna-mod#680 http://www.lapooh.com/index.php/forum/7-hacks-and-enhancements/680-external-antenna-mod#680
I am currently using an MR3020, and while researching, I came across this:

www.sahdan-blog.com/2012/04/membuat-ante...ernal-tl-mr3020.html

The translation is not perfect, but the picture is clear. It would be interesting to know if anyone has attempted this without hosing their box?]]> Hacks and Enhancements Thu, 17 May 2012 23:45:55 +0000 http://www.lapooh.com/index.php/forum/4-community-edition-installation/677-re-no-space-left-on-device#677 http://www.lapooh.com/index.php/forum/4-community-edition-installation/677-re-no-space-left-on-device#677
mv /opt /mnt/usb/
ln -s /mnt/usb/opt/ /opt]]> Community Edition Installation Tue, 15 May 2012 11:10:33 +0000 http://www.lapooh.com/index.php/forum/4-community-edition-installation/673-running-applications#673 http://www.lapooh.com/index.php/forum/4-community-edition-installation/673-running-applications#673 Community Edition Installation Mon, 14 May 2012 01:49:10 +0000 http://www.lapooh.com/index.php/forum/9-minipwner-xlmark-ii/665-what-is-the-minipwner-xl#665 http://www.lapooh.com/index.php/forum/9-minipwner-xlmark-ii/665-what-is-the-minipwner-xl#665
So I've got what I think is a cool idea, I think you all in the community could make it even better.

Check out the TPLink TL-MR3020 www.tp-link.com/en/products/details/?model=TL-MR3020

Its very similar to the TL-WR703N with these differences:
- Its larger
- It has 5 LED's and a three-way switch
- Its easier to get a hold of in the US
- It runs about $40

So my thought is to use this as a platform for a new MiniPwner version. I believe with the three way switch it could be configured to have three different personalities that change just by changing the switch:
1. Traditional MiniPwner drop box. Wifi AP and DHCP on the wire.
2. Passive wireless monitor. Basically power it up and it launches kismet and logs any wifi traffic it can see.
3. Jasager/Wifi Pineapple mode. Performs WiFi AP spoofing and wireless MITM attacks.

I'd love your thoughts about other personalities or other improvements to try to wrap in. I think a web UI, mounting the FAT partition, and getting tutorials for SSH reverse tunnel and VPN session setups are some of the key things that could be added. Its not easy to open up the MR3020 but once you do I think there's plenty of space to mount an internal battery pack.

And we need to come up with a good name for the new version.

Kevin]]> MiniPwner XL/Mark II Fri, 11 May 2012 18:40:49 +0000 http://www.lapooh.com/index.php/forum/4-community-edition-installation/656-copy-the-os#656 http://www.lapooh.com/index.php/forum/4-community-edition-installation/656-copy-the-os#656 Community Edition Installation Wed, 09 May 2012 14:54:14 +0000 http://www.lapooh.com/index.php/forum/4-community-edition-installation/644-internet-connection?limit=6&start=12#644 http://www.lapooh.com/index.php/forum/4-community-edition-installation/644-internet-connection?limit=6&start=12#644 I recently purchased a MiniPwner and am in the process of setting it up. I gotten to step 23 (Type ifconfig wlan0 to check that your wireless settings came up. If you don't have a DHCP assigned address you'll need to troubleshoot your settings.) of the "Build One" instructions. My wireless network is MAC filtered, so I'm plugging the MiniPwner in using ethernet, and DHCP, and telnetting to it using the wireless interface with Backtrack 5. I can connect to it fine, but it will not connect to the internet.

Here are my ifconfig results:

br-lan Link encap:Ethernet HWaddr 8C:21:0A:D8:74:AF
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:144 errors:0 dropped:51 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16081 (15.7 KiB) TX bytes:3807 (3.7 KiB)

eth0 Link encap:Ethernet HWaddr 8C:21:0A:D8:74:AF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:1 overruns:0 frame:0
TX packets:123 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:855 (855.0 TX bytes:16910 (16.5 KiB)
Interrupt:4

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:288 errors:0 dropped:0 overruns:0 frame:0
TX packets:288 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19584 (19.1 KiB) TX bytes:19584 (19.1 KiB)

wlan0 Link encap:Ethernet HWaddr 8C:21:0A:D8:74:AF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:165 errors:0 dropped:0 overruns:0 frame:0
TX packets:176 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:25830 (25.2 KiB) TX bytes:31546 (30.8 KiB)

I would like to be able to connect through the ethernet port to finish setting it up. Any help would be appreciated, thanks.]]> Community Edition Installation Mon, 07 May 2012 16:22:30 +0000 http://www.lapooh.com/index.php/forum/7-hacks-and-enhancements/636-making-a-web-ui?limit=6&start=6#636 http://www.lapooh.com/index.php/forum/7-hacks-and-enhancements/636-making-a-web-ui?limit=6&start=6#636
I have seen the hostapd-karma port, which was very nicely done, But I was looking towards making a very own UI for MiniPwners, simmiliar to the Pineapple MkVI, Darren said "I just threw some php together that executes a command on the Pineapple", does that mean we could make our own Web UI, That could perhaps do the following:

• Perform karma attacks
• Read Router information of the home
• Perform Aircrack operations???
• And more...

If you're interested and can develop in PHP or have a good knowledge, please feel free to post your thoughts below:)

Thanks, Nexus]]> Hacks and Enhancements Mon, 30 Apr 2012 18:23:55 +0000 http://www.lapooh.com/index.php/forum/5-minipwner-support/633-how-to-set-a-static-ip-on-eth0#633 http://www.lapooh.com/index.php/forum/5-minipwner-support/633-how-to-set-a-static-ip-on-eth0#633 Wile setting up my new minipwner, I was able to ssh into it using the wireless interface. The ethernet network I am testing does not use DHCP, how can I set a static IP on the eth0 interface in the minipwner?

Thanks in advance for you help]]> MiniPwner Support Fri, 27 Apr 2012 15:16:38 +0000 http://www.lapooh.com/index.php/forum/4-community-edition-installation/537-this-spam#537 http://www.lapooh.com/index.php/forum/4-community-edition-installation/537-this-spam#537
That said, do you have Akismet or other spam-catching software installed? If not, I highly recommend some.]]> Community Edition Installation Wed, 25 Apr 2012 21:22:49 +0000 http://www.lapooh.com/index.php/forum/4-community-edition-installation/232-packages-missing-from-openwrt-trunk#232 http://www.lapooh.com/index.php/forum/4-community-edition-installation/232-packages-missing-from-openwrt-trunk#232 See this thread for more info:
forum.openwrt.org/viewtopic.php?id=36266

I'm looking for a workaround. Once there is a stable release again I'll probably mirror it here at minipwner.com as well.]]> Community Edition Installation Sun, 22 Apr 2012 14:28:53 +0000